buttons go inactive when Eject

buttons go inactive when Eject

Why do the Load and Eject buttons go inactive when Eject is pressed and held in the eject position.

DTG troubleshooting

Reasons and Solutions:

1. The eject and load sensors have lost orientation when the tray bed moves further out

**Turn machine off and power back on.

Prevention: There is no need to press and hold the Eject button after the tray bed is ejected.

    • Related Articles

    • kiosk will not eject

      Kiosk tray bed would not eject.  It just buzzed when she pressed eject.  The tray bed rail was catching on the inside part of the black cover.  Bent it back and it loads and eject fine now. 

    • Error eject is flashing

      Why is the error eject button flashing? Reasons and Solutions: 1. Flashing together with LED ink lights **Data spooling is incomplete or interrupted. Power off and unplug to reset the printer. **If resetting the printer did not solve the problem the ...