Change the background and needle default colors in EO Design

Change the background and needle default colors in EO Design

By default, the software installs a black background and standard needle color sequence in the palette for the EO Design program. You can change these settings temporarily for the current design, or save them as a default setting to automatically load for each new design. To set up a default palette, follow the directions below.

  1. Click on the Palette icon on the tool bar.
  2. This will open up the Color Palette box.
  3. Click on the Background button located in the upper right of the box. (see screen capture)
  4. Click in the Color Mixing area, somewhere close to the color you want for the back ground color.
  5. Adjust the sliding pointer to the left of the Color Mixing area up or down to fine tune the color. Notice the sample box above the OK and Cancel buttons. It will change as you adjust the color.
  6. You can also change the needle colors in the same manner. Just click on the needle number you wish to change and make the same adjustments as you did for the background.
  7. Design also offers the ability to use manufacturers thread charts to assign colors to the needles. Click on the Threads icon on the left side of the Colors box to access this feature. (see screen capture)
  8. Once you have made all your changes, you can save the changes as the default palette by clicking on the icon that looks like the palette icon with a padlock on it. This will ask you if you want to save the current palette as the default. Click YES to save it.
  9. If you do not wish to save the palette as the default, simply click OK to close the box and apply the changes. This palette will be saved with the design and reload when you open the design again in the future.
  10. If you do not save the palette as the default, the colors will revert to the install defaults next time you open or create a new design.

    • Related Articles

    • How do I set up the grid in EO Design

      Click on the TOOLS drop down menu at the top of the window. From the drop down list, click on OPTIONS. When the Options window opens, click on the DRAWING TAB The first choice is for STYLE. You may choose Line, Plus, Cross or Point. Click the arrow ...

    • How do I add or remove tools on the toolbar in EO Design?

      Adding and removing tools from the toolbars in EO Design is a very simple task. These steps will show you how it is done. The settings you define here will be used by the software as defaults, even after starting a new session or exiting and ...

    • Viper Default Menu Settings

      The Attached PDF cover the Viper Default Menu Settings.

    • Adjusting Needle Bar Depth

      The attached pdf goes over adjusting needle bar depth

    • Problem Centering the Needle

      When the design calls for needles 11-15, the needle will set up off center and we get an error message. We have to manually adjust these needle to center. Needle 15 does not work at all as when it is called the machine moves to its far limit, shakes ...