How do I rotate a design?

How do I rotate a design?

Using the STANDARD Controller:

  1. Load the design as normal
  2. Press the SETTING button
  3. Press the DOWN button twice to access the ANGLE command
  4. Press the SET button
  5. Change the setting by typing in the desired angle; i.e. 180
  6. Press the SET button
  7. Press the PREVIOUS button


Using the LCD Controller:

  1. Load the design as normal
  2. Press the SETTING button (F3)
  3. Press the BASIC button (F1)
  4. Press the DOWN ARROW button twice to access the ANGLE command
  5. Change the setting by typing in the desired angle; i.e. 180
  6. Press the PREVIOUS button (F8)

    • Related Articles

    • LED - How do I rotate my design?

      How do I ROTATE my design in the standard control panel? Load the design as normal. Press the SETTING button. Press the DOWN button on the LCD menu indication screen twice to access the ANGLE command. Press the SET button. Change the setting by ...

    • LED - Clear a design

      How do I CLEAR a design that is currently on my machine in the standard control panel?  Press the STOP button. Hold down the SET button until the machine beeps rapidly and the LCD screen blinks "Design End Code"

    • LCD - Copy a design to disk

      Question: How do I copy a file from the machine memory to a floppy disk? Using the LCD Controller: Press the INPUT button (F1) Press the OUTPUT button (F2) Press the FLOPPY button (F1) Use the LEFT ARROW (F1), UP ARROW (F2), DOWN ARROW (F3) and RIGHT ...

    • How do I load a design?

      Using the STANDARD Controller:  Insert the design disk into the floppy disk drive Press the EMB.CALL button Press the DOWN button to access the FDD CALL command Press the SET button The machine will display all of designs located on the floppy disk ...

    • Increase the satin width on a design

      Using the STANDARD Controller: Load the design as normal Press the SETTING button Press the DOWN button to access the X SATIN command (#6) Press the SET button The machine will display X SATIN: 0 [RANGE 0 5] These numbers represent the degree to ...