Increase the satin width on a design

Increase the satin width on a design

Using the STANDARD Controller:

  1. Load the design as normal
  2. Press the SETTING button
  3. Press the DOWN button to access the X SATIN command (#6)
  4. Press the SET button
  5. The machine will display X SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased horizontally
  6. Type in your choice; i.e. 2
  7. Press the SET button
  8. Press the DOWN button to access the Y SATIN command (#7)
  9. Press the SET button
  10. The machine will display Y SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased vertically
  11. Type in your choice; i.e. 2
  12. Press the SET button
  13. Press the PREVIOUS button twice

Using the LCD Controller:

  1. Load the design as normal
  2. Press the SETTING button (F3)
  3. Press the BASIC button (F1)
  4. Press the DOWN ARROW button (F2) to access the X SATIN command (#5)
  5. The machine will display X SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased horizontally
  6. Type in your choice; i.e. 2
  7. Press the DOWN ARROW button (F2) to access the Y SATIN command (#6)
  8. The machine will display Y SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased vertically
  9. Type in your choice; i.e. 2
  10. Press the PREVIOUS button twice

    • Related Articles

    • LED -Increase the Satin Width

      How do I INCREASE the Satin Width on a design in the standard control panel? Load the design as normal. Press the SETTING button. Press the DOWN button on the LCD menu indication screen to access the X SATING command (#6). Press the SET button. The ...

    • LED - Clear a design

      How do I CLEAR a design that is currently on my machine in the standard control panel?  Press the STOP button. Hold down the SET button until the machine beeps rapidly and the LCD screen blinks "Design End Code"

    • VIDEO Sierra Embroidery Office (Text Satin to Fill)

      Text Satin to Fill Advanced Block Editing tools  make it easy to add density, enlarge, reduce or modify just the selected area, and allow you to edit your embroidery designs with confidence and ease. Scale blocks or entire designs with stitch count ...

    • How do I rotate a design?

      Using the STANDARD Controller: Load the design as normal Press the SETTING button Press the DOWN button twice to access the ANGLE command Press the SET button Change the setting by typing in the desired angle; i.e. 180 Press the SET button Press the ...

    • LCD - Copy a design to disk

      Question: How do I copy a file from the machine memory to a floppy disk? Using the LCD Controller: Press the INPUT button (F1) Press the OUTPUT button (F2) Press the FLOPPY button (F1) Use the LEFT ARROW (F1), UP ARROW (F2), DOWN ARROW (F3) and RIGHT ...