LCD - Copy a design to disk

LCD - Copy a design to disk

Question: How do I copy a file from the machine memory to a floppy disk?

Using the LCD Controller:

  1. Press the INPUT button (F1)
  2. Press the OUTPUT button (F2)
  3. Press the FLOPPY button (F1)
  4. Use the LEFT ARROW (F1), UP ARROW (F2), DOWN ARROW (F3) and RIGHT ARROW (F4) buttons to highlight the desired design.
  5. Press the SELECT button (F7)
  6. You will be given the option of choosing the SWF button (F1) or the TAJIMA button (F2).
  7. For this example press the TAJIMA button (F2).
  8. After the design has completed being copied to the floppy disk, press the PREVIOUS button (F8).

    • Related Articles

    • LED - Copy a file to disk

      How do I COPY a file from the machine memory to a floppy disk in the standard control panel? Click the FDD button. You will be highlighting "1) FFD SAVE" command. Press the SET button. Find the desired design by using the UP or DOWN buttons on the ...

    • VIDEO Tracing a Design using the LCD Control Panel

      Video on tracing a Design using the LCD Control Panel for the SWF/E 601C and the SWF/E 1501C

    • VIDEO Loading a design on the LCD control panel

      Video on Loading a design on the LCD control panel for the SWF/E 601C and the SWF/E 1501C

    • LCD - Controller Instructions

      LCD Controller Abbreviated Instructions SWF LCD Abbreviated Instructions (v2.10) (For most common operations)   Read a Design from Disk 1. Insert the disk into the floppy drive. 2. PressF1 Input 3. PressF1 Floppy. The contents of the floppy drive ...

    • LCD - Offset Programming for Appliqué

      Offset Programming for Appliqué (For SWF LCD Type Controller)   The following is a quick start guide for programming and executing an offset for embroidering appliqué on the SWF LCD type controller. Please refer to the manual starting on page 3-39 ...