LED - Backup a few stitches

LED - Backup a few stitches

How do I BACKUP a few stitches in my design in the standard control panel?

The design must be loaded and stopped. Press the TRIM button. Press the START button.

If yo would like, pull the presser foot down until it snaps into position. This may help you to determine more easily the position you want to back up to.

Hold down the STOP button until you reach the point in the design in which you'd like to be.

If you pull the presser foot down when you press the START button, the machine will automatically release it.

    • Related Articles

    • LED - Clear a design

      How do I CLEAR a design that is currently on my machine in the standard control panel?  Press the STOP button. Hold down the SET button until the machine beeps rapidly and the LCD screen blinks "Design End Code"

    • LED - Basic setting

      How do I put in my basic setting on the standard control panel? Go to 1. BASIC SETTING Press the SETTING button. Using the DOWN key to 3. Angle the input 0-for Flat and 180- for Caps. Press the SET button.

    • LED - CAP and FLAT settings

      How do I SWITCH the machine between CAP and FLAT settings in the standard control panel? Press the MACHINE button. Press the DOWN button. The "2) Machine Function" command will be highlighted. Press the SET button. The "1.Flat, Cap: Flat" command ...

    • LED -Increase the Satin Width

      How do I INCREASE the Satin Width on a design in the standard control panel? Load the design as normal. Press the SETTING button. Press the DOWN button on the LCD menu indication screen to access the X SATING command (#6). Press the SET button. The ...

    • LED - Float to a specific stitch

      How do I FLOAT to a specific stitch in a design in the standard control panel? Load design as normal. You must have at least one stitch sewn in the design for the float command to work. If you have sewn at least one stitch go to #8, if not go to #4. ...