LED - Delete all of the designs

LED - Delete all of the designs

How do I DELETE all of the designs from the machine in a standard control panel?

Press the EMB.CALL button or (IN-OUT button).

Press the DOWN button to access the MEMORY INITIAL command (#7).

Press the SET button. The machine prompts, "Do you want to format? [Yes] [No].

IMPORTANT: IF you do not want to clear the machine memory of designs, press the UP or DOWN button which will highlight the [No] command.

    • Related Articles

    • VIDEO Loading Designs

    • LED - Clear a design

      How do I CLEAR a design that is currently on my machine in the standard control panel?  Press the STOP button. Hold down the SET button until the machine beeps rapidly and the LCD screen blinks "Design End Code"

    • LED - Basic setting

      How do I put in my basic setting on the standard control panel? Go to 1. BASIC SETTING Press the SETTING button. Using the DOWN key to 3. Angle the input 0-for Flat and 180- for Caps. Press the SET button.

    • LED - CAP and FLAT settings

      How do I SWITCH the machine between CAP and FLAT settings in the standard control panel? Press the MACHINE button. Press the DOWN button. The "2) Machine Function" command will be highlighted. Press the SET button. The "1.Flat, Cap: Flat" command ...

    • LED - Backup a few stitches

      How do I BACKUP a few stitches in my design in the standard control panel? The design must be loaded and stopped. Press the TRIM button. Press the START button. If yo would like, pull the presser foot down until it snaps into position. This may help ...