Output settings for writing designs to Tajima disk

Output settings for writing designs to Tajima disk

Before you save a design to the floppy disk or hard drive in Tajima format, you will need to set up the parameters for the software to properly write the data. This is called the Machine Profiles - Output settings. These settings can be accessed from within the Edit, Design or Explorer Programs. This information is shared with all the programs, so it does not matter which program you use to make these settings. So, it is not necessary to make these changes in all three programs.

  1. To make these changes, click on the TOOLS menu at the top of the window in Edit, Design or Explorer.
  2. Click on MACHINE PROFILE (OUTPUT) from the drop down menu.
  3. The Machine Profiles settings window will open.
  4. At the top, change the Machine Profile using the drop down arrow to the right of the box, and scroll down to find TAJIMA - STANDARD, then click on it.
  5. Make sure the Disk code also says Tajima as well.
  6. Refer to the figure below to see the recommended settings for Tajima output.
  7. Make any changes necessary to copy the settings below.
  8. Click APPLY, SET AS DEFAULT and OK to save the settings.

    • Related Articles

    • Set input parameters for reading Tajima designs

      When reading a Tajima design from any source (floppy, CD, file), you will need to insure the proper code settings so that the trims and color changes are correctly imported. This is called the Machine Code Interpreter. This setting can be found under ...

    • Default floppy disk setting to Tajima format

      In order to prevent problems when writing designs to floppy disk, you should set the default format for disk writing to Tajima. Tajima is the preferred format for the SWF embroidery machine. To make Tajima format the default setting, follow the steps ...

    • I want to write designs to the floppy disk

      Some customers prefer to write their designs to floppies using the actual design name instead of the Tajima Gxxx number. This can be done by changing the settings in Embroidery Explorer. Embroidery Explorer is a standard feature for all systems ...

    • Viper Default Menu Settings

      The Attached PDF cover the Viper Default Menu Settings.

    • VIDEO Loading Designs