Set input parameters for reading Tajima designs

Set input parameters for reading Tajima designs

When reading a Tajima design from any source (floppy, CD, file), you will need to insure the proper code settings so that the trims and color changes are correctly imported. This is called the Machine Code Interpreter. This setting can be found under the TOOLS drop down menu in Edit, Design and Explorer. It is only necessary to change these settings in one of the programs as these settings will be shared by all of the programs.

  1. Click on the TOOLS drop down menu at the top of the window in Edit, Design or Explorer.
  2. Click on MACHINE CODE INTERPRETER from the menu.
  3. The Machine Code Interpreter settings window will open.
  4. At the top, change the Name, using the drop down arrow to the right of the box and scroll down to find TAJIMA - STANDARD, then click on it.
  5. Refer to the figure below to see the recommended settings for Tajima Code Interpreter (input).
  6. Click APPLY, then OK to save the settings.

    • Related Articles

    • Output settings for writing designs to Tajima disk

      Before you save a design to the floppy disk or hard drive in Tajima format, you will need to set up the parameters for the software to properly write the data. This is called the Machine Profiles - Output settings. These settings can be accessed from ...

    • VIDEO Loading Designs

    • Default floppy disk setting to Tajima format

      In order to prevent problems when writing designs to floppy disk, you should set the default format for disk writing to Tajima. Tajima is the preferred format for the SWF embroidery machine. To make Tajima format the default setting, follow the steps ...

    • LED - Delete all of the designs

      How do I DELETE all of the designs from the machine in a standard control panel? Press the EMB.CALL button or (IN-OUT button). Press the DOWN button to access the MEMORY INITIAL command (#7). Press the SET button. The machine prompts, "Do you want to ...

    • VIDEO Sierra Embroidery Office (Opening Designs)

      Opening Designs Edit I has always allowed you to do basic editing of designs and add lettering, but with Version 8 you have the addition of exciting new tools and features, beginning with a new user interface. Now you can have multiple designs open ...