VIDEO Kiosk II resetting the waste in counter

VIDEO Kiosk II resetting the waste in counter


How do you Reset the Waste Ink Counter

Your DTG Kiosk II™ includes an easily accessible switch located in the Waste Ink Bottle compartment to assist with the Waste Ink Counter reset procedure:

To reset the Waste Ink Counter using this switch (letÙs call it the Waste Ink Reset Switch), please follow this procedure: Resetting the Waste Ink Counter Kiosk

Ensure that the printer is in the Loaded position (press LOAD)

Turn the Power off at the control panel of the printer, leave the printer connected to mains power

 

 

  • Press and hold the Error Eject and Reset Switch, and while holding them, turn on the power.

  • The Error Eject Light and seven ink lights will start to flash.


 

 

 

  • Release the Error Eject button and Reset Switch, and then quickly press & hold only the Reset Switch again for over 10 seconds.



 

 

 

 

  • The Error Eject Light, Power Light and seven Ink lights will turn on for two seconds.
  • Once the printer starts going through itÙs normal initialization sequence, you can release the Reset Switch

 


The Waste Ink Counter has now been reset.