Viper Default Menu Settings

• Related Articles

• LED - CAP and FLAT settings

  How do I SWITCH the machine between CAP and FLAT settings in the standard control panel? Press the MACHINE button. Press the DOWN button. The "2) Machine Function" command will be highlighted. Press the SET button. The "1.Flat, Cap: Flat" command ...

• Default floppy disk setting to Tajima format

  In order to prevent problems when writing designs to floppy disk, you should set the default format for disk writing to Tajima. Tajima is the preferred format for the SWF embroidery machine. To make Tajima format the default setting, follow the steps ...

• Switch the machine Cap and Flat settings

  Using the STANDARD Controller: Press the MACHINE button. Press the DOWN button The "2) Machine Function" command will be highlighted. Press the SET button. The "1. Flat, Cap: Flat" command will be highlighted. Press the SET button. The machine will ...

• DTG VIPER QUESTION

  When printing both sides of a shirt is it ok to pretreat both sides and then print. I explained that you need to pre-treat, press, print, and cure one side and then repeat the process for the other side. I explained that when curing the first print ...

• DTG Viper Print Quality

  Prints squash and blur at the beginning of the print but then works itself out as it prints. The set screws were loose on the PF drive gear on the conveyor cylinder.